آی پی امداد
آی پی امداد
آریا الکترونیک parcham تکشو

سوال: طراحی و انچه که در باره انتن ها نیاز دارید ؟؟

HOSSENI

VIP+ افتخاری
کاربر
2013-05-09
532
2,119
با تشکر از اطلاعات جالب و مفید در زمینه آنتن
 

ormax

کاربر vip
vip
کاربر
2008-04-16
19
325
مطلب اصلی با توضیحات دقیق:

This UHF wideband amplifier(Ultra High Frequency amplifier) has a total gain of 10 to 15 dB in the 400 – 850 MHz domain frequency so it can be used where the tv signal is weak.

For this UHF antenna tv amplifier to work correctly you need to cut the components pins as short as possible. C1, C2, C6, C7 are SMD type ( surface mounted ). This antenna tv amplifier or uhf wideband amplifier need to be build inside of a metal box and then connected close to the tv antenna.
The power supply is a simple 12V stabilized source. The antenna tv amplifier can be connected directly to the power supply thru coaxial cable of the tv antenna but you need a 10 – 100uH coil on the alimentation line. The tv set will be connected to the uhf amplifier thru a small coupling capacitor.
Adjusting is easy, just bring the P1 to the middle and then adjust it untill you obtain the best tv image quality.

[h=2]Antenna TV amplifier circuit schematic[/h]
Tv antenna UHF amplifier components

L1 = L2 = 2 turns, 3mm Ø
L3 = L4 = 10uH or 10 turns, 0.2mm Ø on ferrite
T = 2SC3358
 

پیوست‌ها

  • 173.3 کیلوبایت بازدیدها: 231
  • 45.9 کیلوبایت بازدیدها: 221

fahime420

کاربر
2016-12-08
3
0
ممنونم از راهنماییتون
بنده دانشجوی ارشد فیزیک هستم...اطلاعات ابتدایی رو داشتم اما از این پست های کاملتون بسیار استفاده کردم
باز هم متشکرم
 

barat2010

کاربر
2017-04-07
11
16
سلام باسپاس فراوان بابت توضیحات کامل وشیوا درزمینه آنتن ها.بنده به سهم خودم استفاده کردم ونهایت تشکر را دارم منتظر پُست های جدید شما هستم

فرستاده شده از SM-G930Fِ من با Tapatalk
 
بالا